Sharehe Cert-Ex™ Network Simulator w/ Designer for CCNA (NetSim w/ Visualizer) provides a virtual lab environment where a router/switch network can be simulated. The software is primarily intended for candidates preparing for CCNA™ exam though it can be used by any individual desirous of learning networking using Cisco® routers and switches. Important features of the CCNA NetSim software: Several lab exercises… Read more »
ShareExam Simulator for A+ Core 2 consists of 325+ questions with Flash cards. The tests are offered in two modes. A. Online version, and b. Downloadable version. In the online version, a user need to take the tests online after logging in to the website (Internet connectivity is required). In the download version, a user may download the examsim, and… Read more »
ShareSwitch Network Simulator provides a virtual lab environment by simulating a switch network consisting of Cisco IOS and Juniper JUNOS switches. Additionally, a lab manual provides hands-on experience configuration and troubleshooting of switch networks consisting of Cisco and Juniper switches. Some screen shots of Switch Simulator Switch Simulator main window Cisco switch console simulator Cisco GUI Switch Simulator Juniper GUI… Read more »
Share The GNC simulates Cisco CP (T) , enabling users to configure and troubleshoot a network using self explanatory navigation pane. A default network diagram is provided for practicing the labs, which may be viewed by clicking on the N/w Diagram button Advanced users can design a Cisco router/switch network using Network Designer module, then configure the same using the… Read more »
ShareExam Simulator for CCNP ENARSI consists of 200+ Questions conforming to the latest exam objectives. The question types include Multiple Choice, Drag-and-Drop, True/False, and Testlets. Please visit here to download Exam Simulator for CCNP ENARSI
ShareThe Junos OS configuration consists of a hierarchy of statements. There are two types of statements: Container statements, which are branches that can contain other statements (including additional container statements or leaf statements). Container statements at the top of the hierarchy are considered to be the trunk of the hierarchy tree. Leaf statements (contained by container statements), which do not… Read more »
Share802.11a standard provides wireless LAN bandwidth of up to 54Mbps in the 5GHz frequency spectrum. The 802.11a standard also uses orthogonal frequency division multiplexing (OFDM) for encoding rather than FHSS or DSSS. 802.11b standard provides for bandwidths of up to 11 Mbps (with fallback rates of 5.5, 2, and 1 Mbps) in the 2.4G Hz frequency spectrum. This standard is… Read more »
ShareAn IPv6 address is a 128-bit alphanumeric value that identifies an endpoint device in an Internet Protocol Version 6 (IPv6) network. IPv6 is the successor to a previous addressing infrastructure, IPv4, which had limitations IPv6 was designed to overcome. Notably, IPv6 has drastically increased address space compared to IPv4. Please click the following link to view a detailed Ipv6 guide:… Read more »
ShareThe CCNA exam simulator consists of a simulator, simlets, testlets, and simulated questions for configuring the WLC (Wireless LAN controller). The scenario questions are challenging to answer, but they assist the candidate get ready to pass the test the first time. Sample questions may be downloaded from the Demo exam. Below are a few screenshots of the application. Please download… Read more »
Share Exam Simulator for Security+ consists of 350+ questions with Flash cards. Exam Objectives Covered include 1.0 Attacks, Threats, and Vulnerabilities 24% 2.0 Architecture and Design 21% 3.0 Implementation 25% 4.0 Operations and Incident Response 16% 5.0 Governance, Risk, and Compliance 14% Total 100% Certexams.com Practice tests for Security+ SY0-601 are available from Security+ Exam Simulator You may also check… Read more »
